Square Gel Tips - 240 pcs

1. Prepare the natural nail with Dry Manicure
2. Apply Nail Prep, Binder to improve adhesion and allow to air dry
3. Shorten and round the free edge of the nail
4. Choose the most suitable size of gel tip and make sure the edges of your nail are well covered. If necessary, you can file down the base of the gel tip so that it fits perfectly on the nail surface.
5. Opacify the inside of the gel tip with a buffer or with a cylindrical nail drill bit, then remove the dust.
6. Apply HD Base to the nail surface, then a thin layer to the inside of the tip, leaving a last drop of product at its base.
7. Place the gel tip on the nail, starting by applying it from its base, slightly away from the cuticle area. Make sure it adheres perfectly. In this step, it is important not to create air bubbles; to avoid this, it is necessary to dose the HD Base: it has to completely fill the space between the tip and the preformed structure.
8. Gently hold the gel tip on the nail and cure for 30 seconds under UV/LED lamp. Now release the gel tip and cure for a further 30 seconds.
9. Remove any excess material that may have come out the side. Use a nail drill bit or a 180/240 grit file.
10. File the free edge to finish the shape, then opacify it with a buffer and remove any dust.
11. Apply HD Base and build a small apex, then cure and continue applying colour and/or decorations.

How to remove Soak-Off Gel Tips:

1, Carefully opacify the surface with a buffer or file.
2, Pour Remover HD onto a pad and place it on the nail; hold it with the Nails Remover Clips and wait about 10 minutes.
3, Now remove the residue with a cuticle pusher or orange wood sticks.

Can also be removed with a nail drill.
Tip: Do not use alcoholic products on gel tips, e.g. Fresh & Pure; do not use primer.
Caution: Keep the gel tips away from heat sources. Do not apply to damaged nails. For professional use only.