Coffin Tips - 120 pcs

1. Start the preparation phase by pushing and removing the cuticles.

2. Matte the nail plate with a 180-grit file, then shorten and shape the free edge of the nail.

3. Now carefully choose the size that best matches the nail. The tip must fit perfectly to the nail bed. In case it is too wide or if you want to change its shape you can file it as desired. You can also use the file to reduce the edge that comes into contact with the natural nail if it's too thick.

4. Pour glue on the inner lower part of the tip that will then be in contact with the nail surface.

5. Then apply the tip starting from the free edge of the nail; apply pressure for approx. 10 seconds, then use the Pinching Tool to ensure that the sides also adhere well.
When carrying out these steps, it is very important that no bubbles are created!

6. Remove any excess glue with a pad, then shorten the tip as desired with the help of our Tip-Cutter.

7. Finish the sides and shape using a 180 grit file. 

8. Proceed with buffing the entire surface of the tip.

9. Then remove dust and residues with a brush, prepare the natural nail with the prep liquids and apply the desired base and builder.